Custom Auto Wind Tower Production Line , Fit Up System High Efficient Fit Up Growing Line

Quick Detail:

The 1+1 growing line concept is designed for large diameter tubular workpieces that have high moments of inertia. so that it can be supported on just two points without suffering excessive deflection. Typical application would be for a wind tower.

Description:

This can be viewed as a conventional idler roll on a non-motorize travel car except that it has the feature of being able to pop up each roller with a stroke of 110mm (max) via a hydraulic cylinder. In addition, the travel car is mounted offset to the centerline of the skid. During installation the protruding side of the travel car carriage should face away from the line up so that the fit up can move closer to the line up.

Applications:

This is a floor mounted unit that allows the entire unit to move longitudinally with a stroke of 300mm longitudinal travel) on its own rail base. The upper body is fitted with an elevating table with a stroke of 160mm.

On the table are the following:

i. 4 x independent steel rollers that have a up-stroke of 130mm

ii. A pair of cylindrical rollers arranged in a V-configuration

iii. The cylindrical rollers are used for facilitating the conveying of the pipe after line-up has been

completed. The 4-independent steel rollers are used for line-up purposes. The height of the steel

roller is lower than the v-cylindrical roller when fully collapsed thus allowing conveying to commence

Specifications:

Competitive Advantage:

Inverter and Main electric elements are Siemens/Schneider or equal brand.

Motor is UK brand Invertek.

VFD rotary speed control, improving the reliability of operation.

Steel or PU roller which can ensure a long time using (at least 2 years).

With lubrication system.

Accept testing before delivery.

Accept special design and custom.